Dental marketing is working when it creates enough qualified full-arch opportunities for your practice to reach the return you want. At Dental Implant Machine we start from that return: we set the ad budget by the number of cases you want to start, run the marketing to produce the consultations those cases need, and judge it on the qualified opportunities it produces for your practice, not on lead counts. If you cannot trace your cases to a source, fix the tracking first.
What should dental implant marketing actually produce?
Dental implant marketing should produce qualified full-arch opportunities: consultations with patients who want full-arch treatment and are able to proceed with it. A lead is a name and a phone number. An opportunity is a patient who has been reached, has said what they want, and has a consultation in your schedule they are in a position to act on. Those patients become your started cases, which makes them the count that shows whether the marketing is doing its job.
A lead count can rise in a quarter in which your schedule held fewer full-arch starts. Read cheaper clicks and more form fills as steps toward an opportunity, and judge the marketing on the cases it started.
Judge those cases against the full cost. The full cost is the ad spend plus what you pay the agency. Return on ad spend leaves the agency's payment out, so add it back before you decide whether the cases were worth what they cost.
Match the cost to the patients who produced the cases. A patient who scheduled treatment in March may have first inquired in December, so take the ad spend and the agency's payment from the earliest inquiry month of your advertising patients to the latest, and set their treatment value against that total. Treat the result as a directional read, because the window also holds spend on patients who have not started yet.
Count a case as started when treatment is scheduled. If you count presented plans or accepted estimates instead, you inflate the result and cannot compare this quarter with the next.
When the result falls short, the question is where. Marketing that is not working has broken at one of the three gates in the Full Arch Framework: finding the right patients, getting them to a consultation, or getting them to start. The rest of this page works out how many opportunities your target needs, then finds the gate that is losing them.
How many qualified opportunities does your practice need to hit its target?
Start from the number of full-arch cases you want to start each month and work backward through your own records. Last quarter's schedule tells you three rates: how many of the patients who attended a consultation went on to start, how many of the patients who booked went on to attend, and how many of the inquiries your team spoke to went on to book.
Divide the case target by the share of attended consultations that start, and you have the consultations you need to hold each month. Divide that by the share of booked patients who attend, and you have the consultations you need to book. Divide again by the share of inquiries that book, and you have the qualified inquiries the marketing has to produce. That last figure is the one to hold the advertising to.
We start from the same place. We set a practice's ad budget by the number of cases it wants to start, and run the marketing to produce the consultations those cases need. A budget set this way can be checked from the first month against counts you can see in your own schedule. If you cannot yet measure one of the three rates, fix that first; the section on finding the gate below shows how.
Read the first month for qualified inquiries and consultations held, and wait for a full quarter before you count started cases, because the starts of any one month belong to patients who inquired earlier.
Group your inquiries by the month they arrived and follow each group forward through spoken to, booked, attended and started. A group with inquiries and nothing after them shows you the break, so fix that stage before you change the spend. Before a new campaign or a new agency starts, write down your baseline for each count, so the new figures are compared with something your practice measured.
Are your leads being reached before they go cold?
An inquiry becomes a consultation when someone reaches the patient while they are still deciding and keeps following up until they book or decline. A full-arch patient may fill in a form after your office has closed, with a question about cost they have not yet asked anyone, while they look at more than one practice. The first practice to speak with that patient has the first chance to answer the question. A call that arrives the next afternoon may find the patient already booked elsewhere, or no longer answering.
Many patients do not pick up the first call. A practice that stops after one call and a voicemail loses the patients who would have answered a later one, so the follow-up has to run across calls, texts and emails over weeks, with one person responsible for it.
Measure this gate from your own phone system. For last month's inquiries, find how long each one waited before a person spoke to the patient, how many attempts were made on those who did not answer, and how many were spoken to at all. Count the inquiries a person spoke to rather than the calls attempted, because a call that reaches voicemail books nobody.
This is the gate DIM Convert takes on. With DIM Convert, our US-based Setter Center makes the first call to a new inquiry, runs the follow-up using the 12-Point Setting Framework, and books qualified patients into your schedule. With DIM Generate, your own team makes the calls and we coach them through the same framework. Our guides to the dental call center and to why dental implant leads are not converting cover who should make the calls and how to tell a lead your team lost from one that was never suitable.
Where is your practice losing cases: Generate, Convert or Close?
Each count from inquiry to started case belongs to one of three gates. Generate is the advertising: how many suitable patients inquire. Convert is the calling: how many of them are spoken to, booked and arrive. Close is the consultation: how many of the patients who arrived go on to start. Walk the counts in that order, find the first one that falls short of what your target needs, and see whose it is.
The agency running the campaigns owns Generate. Whoever calls the leads owns Convert, whether that is your front desk or a team such as ours. Whoever presents the case owns Close. Fix the first shortfall first, because the counts after it receive too few patients to judge until it is fixed.
Check the later counts even if you are sure the leads are the problem. If patients arrive and do not start, more or better leads will sit through the same consultation and leave the same way, and the place to look is how the plan and the money are presented, which dental case acceptance covers. The full-arch marketing funnel walks the counts in order.
To tell which gate it is, start from your schedule. Pull every full-arch case your practice scheduled for treatment last quarter, and for each patient record two things: where they first came from, using four labels (advertising, a referral, organic search, or unknown), and the month they first inquired.
Look at the unknown label first. If it covers a large share of your starts, nobody can yet say which gate is failing, including the agency. Fix the tracking before you change the campaigns, because any change you make before then is a guess about patients you cannot see.
With the sources known, set each line of the agency's report beside the record in your practice that confirms it. Where the two agree, you can rely on the report. Where they disagree, find the first stage at which your count falls below the agency's, and examine that gate first.
| What the agency reports | What you check in your own records | What a gap at this stage hides | Gate |
|---|---|---|---|
| Ad spend by channel | Full read access to the ad accounts | Spend you cannot see, which leaves the result impossible to judge | Generate |
| Leads | Inquiries in your phone system and form inbox, with duplicates and existing patients removed | A lead count padded with repeat contacts and existing patients | Generate |
| Cost per lead | The ad spend you can see divided by your own deduplicated inquiry count | A low figure built on a padded count; even when it checks out, it cannot tell you whether the patients were candidates | Generate |
| Consultations booked | Full-arch consultations in your schedule, by date booked | Inquiries that were never booked, which is a Convert loss | Convert |
| Consultations held | Patients who arrived, from your schedule | Booked patients who did not come | Convert |
| Treatment starts | Cases with treatment scheduled, from your schedule | Patients who arrived and left to think about it | Close |
| Treatment value | The value your practice recorded for those starts | A result that cannot be checked against what was spent | Close |
Each line of an agency report, the record in your own practice that confirms it, and the gate a gap at that line conceals.
A report that ends at leads and cost per lead covers the first three rows and leaves the other four to you. You can measure Convert and Close yourself from your schedule, provided someone in the practice knows the job is theirs. If you are a client of ours, the monthly report we send carries every row above, measured the same way each month.
Each call or form you cannot attribute adds a patient to the unknown label. Two settings tie one to the campaign that produced it:
- A tracked phone number for each campaign. Ask the agency for the list of numbers and the campaign each belongs to.
- The source of every web form carried into the patient record, so a patient who schedules treatment three months later can still be traced to the campaign that found them.
A patient who saw an ad and later called the main line will still arrive as unknown, so ask your front desk to confirm on the first call how the patient heard of you and to record the answer. If you record calls, check your state's consent rules first. Then call one of your tracked numbers, fill in one of your forms, and check that both inquiries reach your records with the right source attached.
What does a result you can check look like?
Ask for five things in any result an agency shows you: the practice, the period, the ad spend, the treatment starts and the treatment value. With all five you can check each figure against the others, and we publish our own clients' results that way.
Sunset Valley Dental, over twelve months from October 2025 to September 2026: $120,000 of ad spend, 64 treatment starts and $1,131,209 in treatment value. Hillcrest Dental, over three months from July to September 2026: $29,491 of ad spend, 14 treatment starts and $218,638 in treatment value. Both results set treatment value against ad spend only, so add the agency's fee to the spend before you compare them with the full-cost test above.
Read a twelve-month figure and a three-month figure in different ways. Over twelve months the patients who inquired have had time to decide. Over three months some of them are still deciding, so the figure is an early read and some of those patients may still start. Hold your own figures to the same standard and quote each one with its period. The practices we publish, with the method behind each figure, are in our dental marketing case studies.
To find the gate where your own practice is losing cases, Find Your Gap asks five questions and names it, and a diagnosis call follows if you want one.
Answer five questions about your own practice and we will name the gate where your full-arch cases are being lost, so you can judge your marketing against the right count. A diagnosis call follows if you want one, with no obligation.
Find Your Gap